| Oil transfer & circulation system : The plants will have two pumps for oil transfer and circulation. Both pumps will be positive displacement gear type, directly coupled with electric motor. The plants will have necessary valves and piping to ensure easy operation and maintenance. Heating System : The plants will have an insulated heater chamber with indirect type bobbin heater for heating of oil up to 80° C. However the working temperature for filtration will be 55° C. Heater pipes will be finned to have more efficient heat transfer. Temperature will be controlled with thermostat or Digital Temperature indicator cum controller.
Filtration System : The filtration system is suitable for removing suspended particles such as colloidal carbon, oxidation sludge, dirt, rust.
Degassing chamber and vacuum system : The oil dispersed while passing through fine filter will be sprayed on reaching ring tray to have an exposure of oil film to vacuum, because of which moisture removal rate will be increased. Degassing chamber will be evacuated with rotary oil sealed vacuum pump moisture trap, valves, etc.
This plants are suitable for Hydraulic Oil , Thermic Fluid, etc. |
