| LOW VOLTAGE POWER SUPPLY |
HIGH VOLTAGE POWER SUPPLY |
Output :
a) 0 to 30V DC at 0 to 2 Amp.
b) 0 to 30V DC at 0 to 5 Amp.
c) 0 to 30V DC at 0 to 10 Amp.
d) 0 to 30V DC dual independent or dual tracking at 0 to 2A.
e) 0 to 30V DC dual independent or dual tracking at 0 to 5A.
f) The output voltages and maximum currents are
continuously adjustable by coarse and fine controls.
g) Voltage and current readings are displayed on separate
3 ½ digit meters of accuracy of ± 2 least counts. |
Output :
a) 0 to 300V DC at 0 to 100mA.
b) 0 to 300V DC at 0 to 300mA.
c) 0 to 300V DC at 0 to 500mA.
d) 0 to 300V DC at 0 to 1000mA.
e)100V DC at 0 to 1A/2A/5A.
f) All DC output are continuously adjustable.
g) DC Voltage and current readings are displayed on
3 ½ Digit meters of accuracy of ± 0.5 ± 2 least counts.
|
Protection :
Outputs are protected for short circuits and overloads. |
Protection :
All DC Outputs are for short circuit and overload protected. AC output is protected for overload and short circuit thru fuse. |
Regulation :
± 0.05% for no load to full load and for ±10% variations in input mains voltage. Regulation is constant voltage constant current type.
|
Regulation :
± 0.1% for DC outputs for no load to full load and for ± 10% variations in input mains voltage constant current type. |
Ripple:
Less than 3 mV r.m.s. |
Ripple:
Less than 10mV r.m.s. in DC output. |
Power Requirements :
230 ± 10% volts, AC, 50/60Hz. |
Power Requirements :
230 ± 10% volts, AC, 50/60Hz. 50,150,250 and 60VA. |
| Note : Power supplies of different specification will be provided as per the specific requirements . |
